APPLICATIONS			TRANSLATE English French Spanish
Power wash cars, trucks, and vans.	Wash down driveways and walkways.	Blast garbage cans.	Remove dirt from motorcycles and ATVs.
Degrease engines.	Wash and wax boats.	Wash patio furniture.	Clean 2nd floor windows and other hard to reach areas.
PARTS LIST			TRANSLATE English French Spanish
1. Interchangeable Tips A.Flush / Rinse Tip - For regular wash B.Jet Spray Tip = For high-pressure wash C.45° Angle Spray Tip - For hard to reach places
2. Hose Attachment 3. Main Control Knob 4. Reservoir Fill Plug 5. Soap Control Lever 6. Automatic Extension Tubes - expands to 19 inches.
Replacement Parts List: 1 - Set of "O" rings 1 - Reservoir Fill Plug 1 - Set of Tips 1 - Anti-Syphon Device To order, send $7.50 USD plus $3.00 USD for postage and handling (total $10.50 USD) U.S. and Worldwide Pantents Granted and Pending Turbo Tek International, Inc. 11100 Santa Monica Blvd, Suite 560, Los Angeles, California, 90025. Made in the U.S.A. ©Turbo Tek International, Inc. All Rights Reserved.   DIRECTIONS TRANSLATE English French Spanish TO WASH 1. Select spray tip for washing application, set on wand, press down, turn clockwise until the tip locks in place. Tug on tip to make sure it has been properly locked. 2. Attach TURBO-WASH® unit to garden hose. Tighten firmly. 3. With TURBO-WASH® Main Control Knob in OFF position, remove reservoir cap and insert specially designed TURBO-WASH® solution bottle. Squeeze liquid into reservoir. If the TURBO-WASH® has been previously used, excess water will drain out of main valve (see To Fill/Refill). When reservoir is full, remove bottle and replace plug. 4. Adjust Main Control Knob to first wash setting and turn water on. Adjust Main Control Knob for firm, steady spray.   DIRECTIONS (CONT.) TRANSLATE English French Spanish BE SURE TO PROTECT YOUR TURBO-WASH® WITH OUR UNLIMITED LIFETIME WARRANTY 5. Adjust Soap Control Lever to desired soap-to-water mixture. For optimal soap-to-water mixture, put Soap Control Level at *(star) position. For more concentrated soap-to-water mixture, adjust Lever downward. Wash from the bottom up, covering entire surface with soap. 6. Turn Soap Control Lever to OFF. 7. With unit pointed away from you, turn Main Control Knob to OFF. Water pressure will be released out of main valve **. Let soap work for 1 minute. 8. Turn Main Control Knob to RINSE. Rinse soap off from top to bottom. ** WARNING: TURBO-WASH® uses an internal pressure/soap metering system. Turning the Main Control Knob to OFF causes water to be expelled through main valve located at the back of the unit. To avoid getting wet, hold the unit away from your during this operation.   DIRECTIONS (CONT.) TRANSLATE English French Spanish TO FILL/REFILL TO CHANGE TIPS TO STORE 1. Set Main Control Knob to OFF** (After first use, this will cause water to drain out of the bottom of the Main Control located at the back of the unit). 2. Remove Reservoir Fill Plug. (After first use, this will cause more water to drain out of the bottom of the Main Control). 3. Insert TURBO-WASH® Solution bottle. Squeeze solution reservoir (more water will drain out of the bottom of the Main Control). Remove bottle and replace plug. 1. Set Main Control Knob to OFF**. Twist the tip counterclockwise from locked position to remove. Place new tip on wand. Press tip down and twist clockwise to lock into place. 1. Drain by turning Main Control Knob to OFF**. Store with Main Control Knob and Soap Control Level in OFF position. IMPORTANT NOTES 1. Never wach your car when the surface is hot. 2. Do not rinse car with water before using soap. 3. TURBO-WASH® helps prevent scratching by removing dirt without sponging or brushing. 4. Som heavy soialge may require sponging. Never use a brush on an automobile or any painted surface. 5. Water pressure varies by area, TURBO-WASH® maintains a perfect water and soap mixture regardless of water pressure. 6. Never leave TURBO-WASH® in hot sun or on hot pavement for extended periods. Let TURBO-WASH® cool before use. 7. Never leave hose pressure on for extended periods with TURBO-WASH® Main Control Knob set to OFF. Hose damage may occur. 8. Never aim TURBO-WASH® in the direction of others. 9. Prevent from freezing. 10. For best results, use only TURBO-WASH® cleaning products which have been exclusively formulated for use in the TURBO-WASH®.   ALL CARTRIDGE ATTACHMENT INSTRUCTIONS TRANSLATE English French Spanish 1. After your vehicle has been washed and rinsed thoroughly with SOFT-SUDS® remove black tip from your TURBO-WASH® and set selected cartridge to end of wand. 2. Push cartridge down so notch on wand is visible in left side of window. 3. Turn clockwise until cartridge locks into place and notch is visible in furthest right side of window. 4. Tug on cartridge to ensure it has locked into place.   ATTACHEMENT INSTRUCTION FOR OPTIONAL 4-WAY TIP TRANSLATE English French Spanish 1. Remove black spray tip from wand. Hold wand below end (as illustrated). Grasp 1-Way Tip is other hand. Be sure ribbed lock ring is positioned away from collar end. Align one of the two small ears on wand with space between the collar halves on 4-Way Tip. 2. Firmly insert wand into 4-Way Tip until 3 ribs at the end of the wand are inside the tips collar. 3. Hold wand firmly attempt to push 4-Way Tip further onto wand. Slowly twist it (about 1/4 turn) until the wand snaps up into the tip another 1/4 inch. Twist tip in either direction to lock. 4. Push the new Tip's ribbed locking ring to the end of the collar to lock tip onto the washer.